Signals Kit

     Each of these kits consists of one glass signal mirror, one hand-held projector, seven ground illumination signals, and an instruction sheet in a moisture vapor-proof barrier hag. Kit M185 is supplied with seven red ground Illumination Signals M187; Kit M186 is equipped with three red ground Illumination Signals M187, two green ground Illumination Signals M188, and two white ground Illumination Signals M189. The signals are held in a pressure sensitive tape bandoleer connected to the projector by a 36-inch lanyard. The projector body has internal threads at each end. An aluminum plug cap with a stainless steel eyebolt is threaded and staked to one end. The plug cap and lower portion of the projector body are knurled. A combination safety and firing slot is cut into the upper portion of the body. A stainless steel, spring-loaded firing pin is assembled inside the projector body. A stainless steel, knurled trigger screw is affixed to the firing pin.

Back to: Supply Depot

Signals Kit

Ghost Squad Gatlin